Follow us:
Browse Products
80mm
Fasteners, Hex Head, Screws, Self Drilling
SCREW 12-14 SELF DRILLING HEX METAL TEKS® C4
Buildex® 12-14 Metal Teks® Hex Head Higrip® with Seal are suitable for fixing metal roofing to steel between 1mm and 5mm thick.
Available in:
| 12-14 X 80mm |
Features
• Fast and Easy application into steel between 1mm and 3mm thick
• High pull-out strength
• Climaseal® 4 corrosion protection available
• Under-roof Corrosion Protection with Shankguard® feature* which prevents the scratching and scouring of the fastener shank that can happen during installation
• Higrip® feature* grips to the roof sheeting to create a positive join preventing water entry and over drilling. It also stops the roof sheet moving down the shank when the roof is walked on.
| brands | |
|---|---|
| Size |
Related products
-
Fasteners, Masonry Fixings, Sleeve Anchors, Flush Head Sleeve Anchors
SLEEVE ANCHOR FLUSH HEAD – 8MM DRILL DIAMETER
The Flush Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a flush head leaving the fixture with a more discrete /clean finish than a traditional hex head sleeve anchor. Ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 45mm, 70mm and 90mm
Available in Zinc.
SKU: n/a -
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD – 16MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 65mm, 110mm or 145mm
Available in Zinc. 110mm also available in Galvanised.
SKU: n/a -
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD – 8MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 40mm, 65mm or 85mm
Available in Zinc or Galvanised
SKU: n/a
