Follow us:
Browse Products
HIGH TENSILE
Fasteners, Hanger Fixings, Light Duty, Masonry Fixings
HANGERZ M10 DRIVER FOR CONCRETE (BLUE)
Hangerz for Concrete are a one-piece, high tensile self tapping fastening system suitable for installation into concrete substrates. Hangerz™ for Concrete are a fast, cost effective alternative to the traditional drop-in anchor halving the installation time. The use of a smaller 6mm drill bit also cuts drill bit costs and give more holes per battery life when using battery operated rotary hammer drills. Hangerz™ are ideal for suspending threaded rod vertically overhead for applications such as AC ducting, hanging pipe, fire protection, and cable-tray applications. Hangerz™ are available to suit M10 threaded rod diameters for vertically suspended applications and are best installed with cordless impact drivers.
Related products
-
Fasteners, Masonry Fixings, Chemical Anchoring, Cartridges
HYBRID GEN2 INJECTION ADHESIVE – WITH C2 SEISMIC CERTIFICATION
When it’s CODE PLATINUM it’s Hybrid Gen 2.
Combining the superior strength of Epoxy with a fast cure Vinylester.
Fire Rating F120 (2 hours) and approved for use in temperatures up to 160°C.
ICCONS BIS-HY is a rapid cure, styrene free, non-sag, extreme performance Hybrid Injection Adhesive.
BIS-HY is suitable for Threaded Rod and Rebar in cracked and non-cracked concrete and Australia’s first rapid cure with Seismic C2 approval for threaded rod.
This revolutionary adhesive injection system lends incredible characteristics to almost all adhesive anchor applications in the professional and DIY spaces.Available in | 280ml | 420ml |
SKU: n/a -
Fasteners, Light Duty, Wallmates
NYLON PLASTER -BITES WITH SCREW – 20 PACK
ICCONS nylon plaster-bite with screw is a two piece, self drilling drywall anchor and screw. Available in drill-point for quick installation. The sharp thread profile cuts smoothly though the drywall ensuring maximum holding capacity. The most economic self-drilling wall anchor on the market, now comes coupled with a pan head screw.
SKU: 20/TOGBITE -
Fasteners, Masonry Fixings, Sleeve Anchors, Flush Head Sleeve Anchors
SLEEVE ANCHOR FLUSH HEAD – 12MM DRILL DIAMETER
The Flush Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a flush head leaving the fixture with a more discrete /clean finish than a traditional hex head sleeve anchor. Ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 65mm, 80mm and 105mm
Available in Zinc.
SKU: n/a
