Follow us:
Facebook
No products in the cart.
Available in: | 8-2 ST/ST DOME HD | 8-4 ST/ST DOME HD | | 8-6 ST/ST DOME HD | 8-8 ST/ST DOME HD |
Marson
8-2 ST/ST DOME HD, 8-4 ST/ST DOME HD, 8-6 ST/ST DOME HD, 8-8 ST/ST DOME HD
Plastic sleeves can be used when using injection adhesives in hollow base materials. The sleeve prevents the adhesive from falling through the material cavity and allows the anchor of choice to be inserted and adhered to properly.
Available for M10/M12 Studs 85mm or 130mm and M16 Studs 85mm
The Flush Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a flush head leaving the fixture with a more discrete /clean finish than a traditional hex head sleeve anchor. Ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 45mm, 55mm, 65mm, 80mm and 100mm
Available in Zinc.
When it’s CODE PLATINUM it’s Hybrid Gen 2. Combining the superior strength of Epoxy with a fast cure Vinylester. Fire Rating F120 (2 hours) and approved for use in temperatures up to 160°C. ICCONS BIS-HY is a rapid cure, styrene free, non-sag, extreme performance Hybrid Injection Adhesive. BIS-HY is suitable for Threaded Rod and Rebar in cracked and non-cracked concrete and Australia’s first rapid cure with Seismic C2 approval for threaded rod. This revolutionary adhesive injection system lends incredible characteristics to almost all adhesive anchor applications in the professional and DIY spaces.
Available in | 280ml | 420ml |
Sending...