Follow us:
Browse Products
280ml | 420ml
Cartridges, Chemical Anchoring, Fasteners, Masonry Fixings
HYBRID GEN2 INJECTION ADHESIVE – WITH C2 SEISMIC CERTIFICATION
When it’s CODE PLATINUM it’s Hybrid Gen 2.
Combining the superior strength of Epoxy with a fast cure Vinylester.
Fire Rating F120 (2 hours) and approved for use in temperatures up to 160°C.
ICCONS BIS-HY is a rapid cure, styrene free, non-sag, extreme performance Hybrid Injection Adhesive.
BIS-HY is suitable for Threaded Rod and Rebar in cracked and non-cracked concrete and Australia’s first rapid cure with Seismic C2 approval for threaded rod.
This revolutionary adhesive injection system lends incredible characteristics to almost all adhesive anchor applications in the professional and DIY spaces.
Available in | 280ml | 420ml |
Features
• EXTREME Load Performance
• Fast 30min cure at 20ºC dry concrete
• Fast cure characteristics save time and money on the job
• ETA approved for cracked concrete
• Fire resistance approval
• Potable Water approval
• Seismic C1 and C2 approved
• Low VOC for green projects
Applications
• Infrastructure construction (roads, viaducts, sound barriers, crash barriers, harbours, high rise construction, steel construction)
• Production Facilities (installation of cranes, robots, converyor lines etc.)
• Suitable for threaded rod and rebar in cracked and non-cracked concrete
Use Conditions
• Installation in cracked and non-cracked concrete C20/25 to C50/60
• For anchor rods M8 – M30, rebar Ø8 – Ø32mm and threaded sleeves M6 – M20
• Seismic action C2: M12 – M24
• For hammer/air drilled holes
• Installation in dry, wet and flooded holes
• Overhead installation allowed
*See Tech Data Sheets for more information
Related products
-
Sealants & Adhesives, Sealants, Adhesive Sealants
PROBOND LIQUIDBOND – 345G
Liquidbond is a adhesive for the construction industry, ideal for sub floors and timber.
PROBOND LIQUIDBOND is a high strength contact adhesive that will not slump on vertical surfaces. It can be used either as a one way liquid adhesive, or a two way contact adhesive. It offers adhesion to most common surfaces.
Conforms to Australian Standard AS 2329-80 (Mastic Adhesives for fixing Wallboards)SKU: 29/LB -
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD – 6.5MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 25mm, 35mm, 55mm or 75mm
Available in Zinc.
SKU: n/a -
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD – 8MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 40mm, 65mm or 85mm
Available in Zinc or Galvanised
SKU: n/a
