Follow us:
Browse Products
TBA
Aluminium Rivets, Fasteners, Large Flange, Peeled, Rivets
RIVET 9/32″ BULB-TITEĀ® ALUMINIUM L-FLANGE RV6605-0910W
Available in:
| 9/32 |
GesipaĀ® Bulb-TiteĀ® Rivet is the original load spreading rivet. During installation, the body of the rivet folds into 3 separate legs which creates a large bearing surface and distributes the clamp force allowing soft or thin materials to be joined without damage. The mandrel of the rivet will break flush with the head over a wide grip range which results in impressive shear strength. Bulb-TiteĀ® Rivets are usually supplied with a neoprene washer under the head for a weather tight seal.
| brands |
|---|
Related products
-
Fasteners, Masonry Fixings, Screw Anchors, Concrete Screw Anchors, Countersunk Head Screw Anchors
GRABCONĀ® COUNTER SUNK HEAD – CARBON STEEL – GALVANISED
GrabconĀ® is part of ICCONS concrete and masonry screw family, coated in a mechanical galvanised finish and available in a flanged hex or Phillips #2 (5mm anchor) and Phillips #3 (6.5mm anchor) countersunk head styles. The Grabcon is incredibly versatile with its high-low cutting thread profile allowing it to tap its own thread into masonry substrates, resulting in a plug less fixing. These fasteners are ideal for light to medium duty applications when fastening into concrete, brick and block. Available in both galvanised hex and countersunk variant, this versatile screw should be in every tradies toolbox!
Available in | (3/16 X 2-1/4″) 5 X 58 | (1/4 X 1-3/4″) 6.5 X 45 | (1/4 X 4″) 6.5 X 100 |
SKU: n/a -
Fasteners, Masonry Fixings, Light Duty, Hanger Fixings
HANGERZ M10 DRIVER FOR CONCRETE (BLUE)
Hangerz for Concrete are a one-piece, high tensile self tapping fastening system suitable for installation into concrete substrates. Hangerzā¢ for Concrete are a fast, cost effective alternative to the traditional drop-in anchor halving the installation time. The use of a smaller 6mm drill bit also cuts drill bit costs and give more holes per battery life when using battery operated rotary hammer drills. Hangerzā¢ are ideal for suspending threaded rod vertically overhead for applications such as AC ducting, hanging pipe, fire protection, and cable-tray applications. Hangerzā¢ are available to suit M10 threaded rod diameters for vertically suspended applications and are best installed with cordless impact drivers.
SKU: 16/VSOCCON -
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD ā 12MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 60mm, 75mm, 100mm or 130mm
Available in Zinc or Galvanised
SKU: n/a
