Follow us:
Browse Products
LOW PROFILE HEAD
Fasteners, Hollow Wall, Light Duty, Masonry Fixings
M4 HOLLOW WALL ANCHOR 1/8″ (10-16mm)
The Powers hollow wall anchor is designed for use in base materials such as plaster, wallboard or plywood.
Once the anchor has been set, the screw may be removed as often as necessary without loosing the anchor inside the cavity.
Features
• Low profile head allows for flush finishing
• Large flange interface prevents the head from pulling into the material being fastened too
• Anti spin barbs incorporated in the flange, prevents the anchor from spinning in the hole
| brands |
|---|
Related products
-
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD – 10MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 40mm, 50mm, 60mm, 75mm, 95mm or 120mm
Available in Zinc or Galvanised
SKU: n/a -
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD – 16MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 65mm, 110mm or 145mm
Available in Zinc. 110mm also available in Galvanised.
SKU: n/a -
Fasteners, Masonry Fixings, Sleeve Anchors, Flush Head Sleeve Anchors
SLEEVE ANCHOR FLUSH HEAD – 8MM DRILL DIAMETER
The Flush Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a flush head leaving the fixture with a more discrete /clean finish than a traditional hex head sleeve anchor. Ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 45mm, 70mm and 90mm
Available in Zinc.
SKU: n/a
