STRONG AS NAILS FIX IT – 350G

Solvent based high performance, gap filling construction adhesive. High bond strength. Suitable for vertical and horizontal bonding applications, both inside and outside. Does not attack Polystyrene. Suitable for bonding of two non-porous substrates (use transfer method).

Properties

• Universal use
• Suitable for bonding on uneven surfaces.
• Makes the use of screws and nails redundant.
• Water resistant
• Suitable for bonding polystyrene

Applications

• All bonding in assembly techniques.
• Bonding in the renovation industry.
• Bonding in construction industry.
• Bonding of cable trays and panels.

Substrates

Various porous and non-porous surfaces such as wood, concrete, stone and other materials commonly used in construction.
Nature: clean, free of dust and grease.
Surface preparation: No pretreatment required. Strong As Nails Fix It has excellent adhesion on most substrates. There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary adhesion test on any substrate.

Application method

All surfaces must be clean, dry and free from dust, dirt, grease and loose materials. Cut the tip off the cartridge, screw on the nozzle and trim to the required angle and bead size. Apply in beads onto one surface, press together strongly and maintain parts together for 24 hours with temporary fasteners or by clamping. For the bonding of heavy materials and of drywall panels use the transfer method: Apply adhesive onto one of the substrates, press the parts together strongly and release immediately. Wait for up to 5 minutes and then return parts together and press together.
Strong bond after 24 hours, full cure up to 48 hours.
Store in cool and dry conditions between +5°C and +25°C.
Cleaning: fresh with Soudal Swipex or Adhesive Remover. Cured with Soudal Adhesive Remover or removed mechanically.
Repair: With the same material