Follow us:
Browse Products
Fasteners, Hex Head, Screws, Type 17
SCREW T17 14 HEX C4
A coarse thread hex head screw designed for a range of general fastening applications such as fixing timber or thin steel to a timber substrate, whilst eliminating the need for pre-drilling.
Available in :
| 10-12×25 HEX C4 | 12-11×25 HEX C4 |
| 12-11×35 HEX C4 | 12-11×40 HEX C4 |
| 12-11×45 HEX C4 | 12-11×50 HEX C4 |
| 12-11×65 HEX C4 |
The Type 17 point is a sharp, fluted point offering great timber penetration and drive when accompanied by a coarse biting thread, ultimately allowing for a quicker and cleaner install. This screw is available in zinc yellow or class 4 galvanised variants, making it ideal for internal and external applications.
Features
• Hex head increases effective clamping area and pull-out resistance
• The Type 17 point is a sharp, fluted point offering great timber penetration and drive when accompanied by a coarse biting thread, ultimately allowing for a quicker and cleaner install
• Available in zinc yellow or class 4 galvanised finish for indoor and outdoor applications
• Hex head increases effective clamping area and pull-out resistance
• The Type 17 point is a sharp, fluted point offering great timber penetration and drive when accompanied by a coarse biting thread, ultimately allowing for a quicker and cleaner install
• Available in zinc yellow or class 4 galvanised finish for indoor and outdoor applications
Applications
• Designed to fix timber or thin steel to timber substrates
• Designed to fix timber or thin steel to timber substrates
Related products
-
Fasteners, Light Duty, Wallmates
METAL WALL MATE PLASTER-BITES – 100 BOX
ICCONS metal plaster-bites are a single piece, self drilling drywall anchor. Available in both drill-point for quick installation or fish-mouth to accommodate for any length of screw. The sharp thread profile cuts smoothly though the drywall ensuring maximum holding capacity. Accommodates both 6 and 8 gauge screws.
SKU: 20/WALLM -
-
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD – 20MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 75mm, 105mm or 150mm
Available in Zinc.
SKU: n/a
