Follow us:
Browse Products
12 SIZES AVAILABLE
Bugle Head, Fasteners, Screws, Type 17
SCREW NP BUGLE FINE HEAD ZY
Needle Point Bugle Head Fine Thread screws are ideal for fixing plasterboard to thin steel substrates such as walls and ceilings (ensure steel thickness is no more than 0.75mm).
Available in: | 6×20 | 6×25 | 6-18×32 | 6×41 | 6×45 | 7-15×25 | 7-15×32 | 7×45 | 7×51 | 7×57 | 8×65 | 10×100 |
These needle point screws come equip with a No. 2 Philips drive and fine thread for self drilling into thin gauge steel.
Features
• Piercing needle point for penetrating thin gauge steel (up to 0.75mm thick)
• Fine thread for greater screw control and self tapping into thin steel
• No. 2 Phillips recess drive
• Bugle head for flush finish
Applications
• Fixing plasterboard to steel frames (wall and ceiling construction)
Related products
-
Fasteners, Masonry Fixings, Light Duty, Wallmates
NYLON WALL MATE PLASTER-BITES – 100 BOX
ICCONS nylon plaster-bites are a single piece, self drilling drywall anchor. Available in both drill-point for quick installation or fish-mouth to accommodate for any length of screw. The sharp thread profile cuts smoothly though the drywall ensuring maximum holding capacity. Accommodates both 6 and 8 gauge screws.
SKU: 20/WALLN -
Fasteners, Masonry Fixings, Chemical Anchoring, Cartridges
HYBRID GEN2 INJECTION ADHESIVE – WITH C2 SEISMIC CERTIFICATION
When it’s CODE PLATINUM it’s Hybrid Gen 2.
Combining the superior strength of Epoxy with a fast cure Vinylester.
Fire Rating F120 (2 hours) and approved for use in temperatures up to 160°C.
ICCONS BIS-HY is a rapid cure, styrene free, non-sag, extreme performance Hybrid Injection Adhesive.
BIS-HY is suitable for Threaded Rod and Rebar in cracked and non-cracked concrete and Australia’s first rapid cure with Seismic C2 approval for threaded rod.
This revolutionary adhesive injection system lends incredible characteristics to almost all adhesive anchor applications in the professional and DIY spaces.Available in | 280ml | 420ml |
SKU: n/a -
Fasteners
CHEMSELECT PLASTIC SLEEVES
Plastic sleeves can be used when using injection adhesives in hollow base materials. The sleeve prevents the adhesive from falling through the material cavity and allows the anchor of choice to be inserted and adhered to properly.
Available for M10/M12 Studs 85mm or 130mm and M16 Studs 85mm
SKU: n/a
