Follow us:
Browse Products
TBA
Fasteners, Hex Head, Screws, Self Drilling
SCREW 14-20 SELF DRILLING HEX SKYFIXX® WITH WEATHERLOCK C4
For crest fixing fibreglass roof sheeting to steel purlins up to 5mm thick.
Available in:
| 14-20 X 65mm |
For crest fixing fiberglass roof sheeting to steel purlins up to 5mm thick.
Assembled with 32mm washer for a waterproof, UV and weather resistant seal.
Specially designed wings cut a 10mm clearance hole in fiberglass to allow for movement.
5/16” hex head for compatible installation with regular roofing screws.
| brands | |
|---|---|
| Size |
Related products
-
Fasteners, Masonry Fixings, Sleeve Anchors, Flush Head Sleeve Anchors
SLEEVE ANCHOR FLUSH HEAD – 8MM DRILL DIAMETER
The Flush Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a flush head leaving the fixture with a more discrete /clean finish than a traditional hex head sleeve anchor. Ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 45mm, 70mm and 90mm
Available in Zinc.
SKU: n/a -
Fasteners, Masonry Fixings, Screw Anchors, Concrete Screw Anchors, Countersunk Head Screw Anchors
GRABCON® COUNTER SUNK HEAD – CARBON STEEL – GALVANISED
Grabcon® is part of ICCONS concrete and masonry screw family, coated in a mechanical galvanised finish and available in a flanged hex or Phillips #2 (5mm anchor) and Phillips #3 (6.5mm anchor) countersunk head styles. The Grabcon is incredibly versatile with its high-low cutting thread profile allowing it to tap its own thread into masonry substrates, resulting in a plug less fixing. These fasteners are ideal for light to medium duty applications when fastening into concrete, brick and block. Available in both galvanised hex and countersunk variant, this versatile screw should be in every tradies toolbox!
Available in | (3/16 X 2-1/4″) 5 X 58 | (1/4 X 1-3/4″) 6.5 X 45 | (1/4 X 4″) 6.5 X 100 |
SKU: n/a -
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD – 6.5MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 25mm, 35mm, 55mm or 75mm
Available in Zinc.
SKU: n/a
