Follow us:
Browse Products
TBA
Countersunk, Fasteners, Screws, Self Drilling
SCREW (10G) 10-16 SQUARE DRIVE COUNTERSUNK C3
Similar to a sheet metal screw, multi-purpose self-drilling screws have a drill-shaped point to cut through the substrate thus eliminating the need to drill a pilot hole.
Available in:
| 10-16 X 100mm |
Designed for fixing into soft steel or other metals, where a flush finish is required. Applications include hinges, gates and fences.
| brands | |
|---|---|
| Size |
| Manufacturer | Macsim |
|---|---|
| Screw Type | Self Drilling |
| Gauge / Diameter | 10G |
| Length | 100mm |
| Screw TPI | 16 |
| Head Type | Countersunk |
| Drive Type | Square |
| Drive Size | #2 |
| Screw Material | Steel |
| Screw Coating | Galvanised Class 3 |
| Box Quantity | 500 |
| Fully Threaded | Yes |
| Neoprene Washer Included | No |
| Collated? | No |
Related products
-
Fasteners, Light Duty, Wallmates
NYLON PLASTER -BITES WITH SCREW – 20 PACK
ICCONS nylon plaster-bite with screw is a two piece, self drilling drywall anchor and screw. Available in drill-point for quick installation. The sharp thread profile cuts smoothly though the drywall ensuring maximum holding capacity. The most economic self-drilling wall anchor on the market, now comes coupled with a pan head screw.
SKU: 20/TOGBITE -
Fasteners, Masonry Fixings, Light Duty, Hanger Fixings
THUNDERBOLT PRO-XTM – ROD HANGER
The Thunderbolt Pro-XTM Rod Hanger features quick and safe installation, high load capacities in both cracked and non-cracked concrete with undercut load transmission. National Code Compliant (NCC), ETA Approved in Cracked Concrete, Fire Rated and CE Certified, this Rod Hanger is perfect for applications requiring safety critical threaded rod suspension, such as AC ducting, hanging pipe, fire protection, and cable-tray applications.
The Thunderbolt Pro-XTM Rod Hanger can be easily removed and does not leave residue or metal components in the drilled hole that can cause corrosion. Loads can be achieved immediately upon installation
SKU: 16/VVHCM10X57 -
Fasteners, Masonry Fixings, Light Duty, Drop In Anchors
DROP-IN ANCHORS (NON-LIPPED) – SETTING TOOL
ICCONS standard drop-in anchor setting tool is required for correctly setting ICCONS range of standard and approved, zinc or stainless steel drop-in anchors.
Available in | M10 | M12 |
*User must ensure the correct size of setting tool is used in conjunction with the correct size drop-in anchor.
SKU: n/a
