Follow us:
Browse Products
10 SIZES AVAILABLE
Bolts, Nuts & Washers, Fasteners, Hex Bolt, Mild Steel Hex Bolts
M10 RANGE METRIC HEX ZINC – BOLT & NUT
M10 Zinc Plated Metric Hex Bolt & Nut Sets
Available in:
| M10 X 20mm | M10 X 45mm |
| M10 X 60mm | M10 X 65mm |
| M10 X 80mm | M10 X 90mm |
| M10 X 110mm | M10 X 120mm |
| M10 X 130mm | M10 X 140mm |
M10 Zinc Plated Hex Metric Bolt & Nut Sets
Related products
-
Fasteners, Masonry Fixings, Sleeve Anchors, Flush Head Sleeve Anchors
SLEEVE ANCHOR FLUSH HEAD – 8MM DRILL DIAMETER
The Flush Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a flush head leaving the fixture with a more discrete /clean finish than a traditional hex head sleeve anchor. Ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 45mm, 70mm and 90mm
Available in Zinc.
SKU: n/a -
Fasteners, Masonry Fixings, Screw Anchors, Concrete Screw Anchors, Countersunk Head Screw Anchors
GRABCON® COUNTER SUNK HEAD – CARBON STEEL – GALVANISED
Grabcon® is part of ICCONS concrete and masonry screw family, coated in a mechanical galvanised finish and available in a flanged hex or Phillips #2 (5mm anchor) and Phillips #3 (6.5mm anchor) countersunk head styles. The Grabcon is incredibly versatile with its high-low cutting thread profile allowing it to tap its own thread into masonry substrates, resulting in a plug less fixing. These fasteners are ideal for light to medium duty applications when fastening into concrete, brick and block. Available in both galvanised hex and countersunk variant, this versatile screw should be in every tradies toolbox!
Available in | (3/16 X 2-1/4″) 5 X 58 | (1/4 X 1-3/4″) 6.5 X 45 | (1/4 X 4″) 6.5 X 100 |
SKU: n/a -
Fasteners, Light Duty, Wallmates
METAL WALL MATE PLASTER-BITES – 100 BOX
ICCONS metal plaster-bites are a single piece, self drilling drywall anchor. Available in both drill-point for quick installation or fish-mouth to accommodate for any length of screw. The sharp thread profile cuts smoothly though the drywall ensuring maximum holding capacity. Accommodates both 6 and 8 gauge screws.
SKU: 20/WALLM
