Follow us:
Browse Products
HIGH TENSILE
Fasteners, Hanger Fixings, Light Duty
HANGERZĀ® FOR TIMBER – VERTICAL 1/4X50 M10
ICCONS HangerzĀ® for Timber are a one-piece, high tensile self drilling fastening system suitable for installation into timber substrates. HangerzĀ® are ideal for suspending threaded rod vertically overhead for applications such as AC ducting, hanging pipe, fire protection, and cable-tray applications in timber base material.
HangerzĀ® are available to suit M10 threaded rod diameters for vertically suspended applications and are best installed with cordless impact drivers.
Features
ā¢ Suitable for M10 threaded rod
ā¢ Single piece, high tensile self tapping fastener for threaded rod
Applications
ā¢ Suspending threaded rod
ā¢ Suspending conduit
ā¢ HVAC ductwork and strut channels
ā¢ AC ducting
ā¢ Hanging pipe
ā¢ Fire protection
ā¢ Cable tray applications
ā¢ Suitable for timber substrates
| brands |
|---|
Related products
-
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD ā 8MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 40mm, 65mm or 85mm
Available in Zinc or Galvanised
SKU: n/a -
Fasteners, Masonry Fixings, Chemical Anchoring, Cartridges
HYBRID GEN2 INJECTION ADHESIVE – WITH C2 SEISMIC CERTIFICATION
When itās CODE PLATINUM itās Hybrid Gen 2.
Combining the superior strength of Epoxy with a fast cure Vinylester.
Fire Rating F120 (2 hours) and approved for use in temperatures up to 160Ā°C.
ICCONS BIS-HY is a rapid cure, styrene free, non-sag, extreme performance Hybrid Injection Adhesive.
BIS-HY is suitable for Threaded Rod and Rebar in cracked and non-cracked concrete and Australiaās first rapid cure with Seismic C2 approval for threaded rod.
This revolutionary adhesive injection system lends incredible characteristics to almost all adhesive anchor applications in the professional and DIY spaces.Available in | 280ml | 420ml |
SKU: n/a -
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD ā 12MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 60mm, 75mm, 100mm or 130mm
Available in Zinc or Galvanised
SKU: n/a
