Follow us:
Browse Products
3 SIZES AVAILABLE
Bolts, Nuts & Washers, Fasteners, Hex Bolt, Other Products
1/4″ UNF BHG8ZF SERIES GRADE 8 HEX ZINC – BOLT ONLY
Grade 8 UNF AS2465 Zinc Plated Hex Bolt
Available in:
| 1/4 X 1 1/2 |
| 1/4 X 1 3/4 |
| 1/4 X 2 1/2 |
Grade 8 UNF AS2465 Zinc Plated Hex Bolt
HOBSON UNF HEX BOLT – RECOMMENDED TIGHTENING TORQUE
The tightening torque values given in the above table serve only as a guide. A k factor of 0.2 has been used which assumes threads are plain finish, burr free with a light oil coating. It should be noted that these figures are based on the first tightening of single assemblies in isolation
Related products
-
Fasteners, Masonry Fixings, Sleeve Anchors, Flush Head Sleeve Anchors
SLEEVE ANCHOR FLUSH HEAD – 12MM DRILL DIAMETER
The Flush Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a flush head leaving the fixture with a more discrete /clean finish than a traditional hex head sleeve anchor. Ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 65mm, 80mm and 105mm
Available in Zinc.
SKU: n/a -
Fasteners, Sleeve Anchors, Hex Head Sleeve Anchors
SLEEVE ANCHOR HEX HEAD – 10MM DRILL DIAMETER
The Standard Hex Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a hex head, ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 40mm, 50mm, 60mm, 75mm, 95mm or 120mm
Available in Zinc or Galvanised
SKU: n/a -
Fasteners, Masonry Fixings, Light Duty, Hanger Fixings
THUNDERBOLT PRO-XTM – ROD HANGER
The Thunderbolt Pro-XTM Rod Hanger features quick and safe installation, high load capacities in both cracked and non-cracked concrete with undercut load transmission. National Code Compliant (NCC), ETA Approved in Cracked Concrete, Fire Rated and CE Certified, this Rod Hanger is perfect for applications requiring safety critical threaded rod suspension, such as AC ducting, hanging pipe, fire protection, and cable-tray applications.
The Thunderbolt Pro-XTM Rod Hanger can be easily removed and does not leave residue or metal components in the drilled hole that can cause corrosion. Loads can be achieved immediately upon installation
SKU: 16/VVHCM10X57
